How Landfills Works

You­ have just finished your meal at a fast food restaurant and you throw your uneaten food, food wrappers, drink cup, utensils and napkins into the trash can. You don’t think about that waste again. On trash pickup day in your neighborhood, you push your can out to the curb, and workers dump the contents into a big truck and haul it away. You don’t have to think about that waste again, either.

But maybe you have wondered, as you watch the trash truck pull away, just where that garbage ends up.

Americans generate trash at an astonishing rate of 4.6 pounds (2.1 kilograms) per day per person, which translates to 251 million tons (228 million metric tons) per year [source: EPA]. This is almost twice as much trash per person as most other major countries. What happens to this trash? Some gets recycled or recovered and some is burned, but the majority is buried in landfills. In this article, we will examine how a landfill is made, what happens to the trash in landfills, what problems are associated with a landfill and how these problems are solved.

Operations –

During landfill operations the waste collection vehicles are weighed at a weighbridge on arrival and their load is inspected for wastes that do not accord with the landfill’s waste acceptance criteria. Afterward, the waste collection vehicles use the existing road network on their way to the tipping face or working front where they unload their load. After loads are deposited, compactors or dozers are used to spread and compact the waste on the working face. Before leaving the landfill boundaries, the waste collection vehicles pass through the wheel cleaning facility. If necessary, they return to the weighbridge in order to be weighed without their load. Through the weighing process, the daily incoming waste tonnage can be calculated and listed in databases. In addition to trucks, some landfills may be equipped to handle railroad containers. The use of ‘rail-haul’ permits landfills to be located at more remote sites, without the problems associated with many truck trips.

Typically, in the working face, the compacted waste is covered with soil daily. Alternative waste-cover materials are several sprayed-on foam products and temporary blankets. Blankets can be lifted into place with tracked excavators and then removed the following day prior to waste placement. Chipped wood and chemically ‘fixed’ bio-solids may also be used as an alternate daily cover. The space that is occupied daily by the compacted waste and the cover material is called a daily cell. Waste compaction is critical to extending the life of the landfill. Factors such as waste compressibility, waste layer thickness and the number of passes of the compactor over the waste affect the waste densities.

Impacts –

A large number of adverse impacts may occur from landfill operations. These impacts can vary: fatal accidents (e.g., scavengers buried under waste piles); infrastructure damage (e.g., damage to access roads by heavy vehicles); pollution of the local environment (such as contamination of groundwater and/or aquifers by leakage and residual soil contamination during landfill usage, as well as after landfill closure); offgassing of methane generated by decaying organic wastes (methane is a greenhouse gas many times more potent than carbon dioxide, and can itself be a danger to inhabitants of an area); harbouring of disease vectors such as rats and flies, particularly from improperly operated landfills, which are common in developing countries; injuries to wildlife; and simple nuisance problems (e.g., dust, odour, vermin, or noise pollution).

Get in Touch

Come and visit our office or simply send us an email and we will connect with you as soon as possible.
Plot No. 15, Phase-1, HSIIDC,
Rai Industrial Area, Sonipat
Haryana 131029
support@polarelectronics.net
Call us
1800 180 1039
+91 130-2985979

Copyright by Polar Electronics Pvt Ltd. All rights reserved. | Sitemap

Translate »